ECO V Series
V1000 / V1200 / V1400
SHARPTECH's innovative powerful ECO V series, high speed vertical machining center equipped with 7.5/11kw spindle motor provide mass cutting capacity, and direct drives spindle is available up to 30000rpm. The ball screws of XYZ axes use high precision C3 class with pre-loaded, no backlash designed and direct transmission to achieve best cutting performance. All axes are equipped with linear guide way, to achieve heavy loading and heavy cutting capacity, and 2kw axial motors are applied to all axes. SHARPTECH's construction uses only high quality well ribbed meehanite cast iron included machine's base, saddle, table, wider column and head stock. All structure parts are manufactured from high quality cast iron with tempering and normalization heat treatment. This resulted to assure the extremely high stability and high rigidity of material to achieve superior cutting performacne without deformation by optimal FEA process. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Model | Unit | V1000 | V1200 | V1400 |
---|---|---|---|---|
Travel | ||||
X axis | mm (in) | 1000 (39) | 1200 (47) | 1400 (55) |
Y axis | mm (in) | 510 (20) | 510 (20) | 510 (20) |
Z axis | mm (in) | 510 20) | 510 20) | 510 20) |
Spindle nose to table | mm (in) | 125-635 (4.9x25) | 125-635 (4.9x25) | 125-635 (4.9x25) |
Spindle center to column | mm (in) | 540 (21) | 540 (21) | 540 (21) |
Table | ||||
Table size | mm (in) | 1000x500 (39x19.6) | 1200x500 (47x19.6) | 1400x500 (55x19.6) |
Table height | mm (in) | 860 (33.8) | 860 (33.8) | 860 (33.8) |
Table surface (T slot) | 5-18T x100 | 5-18T x100 | 5-18T x100 | |
Table Max. load | kg (Ibs) | 800 (1760) | 1000 (2200) | 1200 (2640) |
Spindle | ||||
Spindle speed(Belt) | rpm | 10,000 | 10,000 | 10,000 |
Spindle motor power | KW (hp) | 7.5/11 (10/15) | 7.5/11 (10/15) | 7.5/11 (10/15) |
Spindle taper | BT40 (CAT40) | BT40 (CAT40) | BT40 (CAT40) | |
Axes Rapid and Feed Rate | ||||
XYZ Rapid | M/min | 36/36/30 (1417/1417/1181) | ||
XYZ feed | M/min | 1-10 (1-393) | 1-10 (1-393) | 1-10 (1-393) |
XYZ Servo power | Kw (hp) | 2 (2.66) | 2 (2.66) | 2 (2.66) |
ATC | ||||
Mode | Drum type | Drum type | Drum type | |
Tool shank type | #40 | #40 | #40 | |
No. of tools | no. | 16 | 16 | 16 |
ATC time (T-T) | sec | 8 | 8 | 8 |
ATC time (C-C) | sec | 14 | 14 | 14 |
Pocket pitch | mm | 104 | 104 | 104 |
Max. tool length | mm | 250 | 250 | 250 |
Max. tool weight | kg | 7 | 7 | 7 |
Max. tool Dia. | mm | 100 | 100 | 100 |
(No adjacent) | mm | 125 | 125 | 125 |
Accuracy | ||||
Positioning X/Y/Z | mm | VDI/DGQ 3441 0.015 | ||
Repeatability X/Y/Z | mm | VDI/DGQ 3441 Ps max. 0.01 | ||
Pneumatic | unit | |||
System pressure | bar | 6 | 6 | 6 |
Compressed air consumption | I/min | 400 | 400 | 400 |
Coolant system | ||||
Pump motor output | KW | 0.96 (1.27) | 0.96 (1.27) | 0.96 (1.27) |
Pump flow rate | I/min | 66 | 66 | 66 |
Pump pressure | bar | 1.3 (50Hz) | 1.3 (50Hz) | 1.3 (50Hz) |
Pump/Machine | 2 | 2 | 2 | |
Tank capacity | liter | 240 | 240 | 240 |
Power requirement | ||||
Power capacity | KVA | 15 | 15 | 15 |
Dimensions | ||||
Length | mm (in) | 2000 (79) | 2000 (79) | 2000 (79) |
Width | mm (in) | 2600 (103) | 2600 (126) | 2600 (126) |
Machine height | mm (in) | 2500 (99) | 2500 (99) | 2500 (99) |
Weight | kg (Ibs) | 4600 (10120) | 5200 (11440) | 5400 (11880) |